HUNE supplies deep groove ball bearings both as individual components and as core parts for roller wheels, sliding hardware and mechanical assemblies. Our range includes 6000, 6200, 6300, 6800 and 6900 series bearings for different installation spaces and operating requirements. Buyers can source the bearing alone or coordinate it with plastic, rubber or metal roller components, helping simplify component matching and assembly sourcing within one supply system.
HUNE offers several deep groove ball bearing series for different installation spaces and assembly requirements. Selection should consider bearing size, available mounting space and the surrounding roller or mechanical structure. The series below provide a practical starting point for matching bearings with roller wheels, sliding hardware and related assemblies.
6000 and 6200 series bearings cover commonly used deep groove ball bearing sizes for roller wheels, sliding mechanisms and general mechanical assemblies. They are suitable starting points where standard bearing proportions and readily matched roller structures are required.
The 6300 series provides a larger bearing cross-section within the HUNE range and can be considered where the surrounding roller or assembly is designed around a more substantial bearing structure. Final selection should be based on the required bearing size and application conditions.
6800 and 6900 series bearings are suited to compact assemblies where installation space is limited and a thinner bearing profile is preferred. They can be matched with slim roller wheels, guide components and other space-sensitive mechanical structures.
Use these points to prepare a clear specification for the selected component.
Provide bore, outside diameter and width, together with the shaft and housing tolerances. Identify which ring rotates and how each ring is retained.
State radial and axial loads, rotational speed, duty cycle and temperature. Closure type and lubrication should be reviewed for dust, moisture and friction requirements.
For use inside a coated roller, include the outer wheel geometry and the bearing retention method. Confirm assembly clearance and running behaviour on the completed component.
Deep groove ball bearing selection starts with the required dimensions and the surrounding roller or mechanical structure. HUNE reviews the bearing specification together with shaft, housing and assembly requirements before confirming the suitable series and configuration for sampling or repeat supply.
Provide the required bearing dimensions, drawing, existing sample or information about the roller and mechanical assembly. Bore size, outside diameter, width, shaft fit, housing fit and available installation space are reviewed first.
The suitable 6000, 6200, 6300, 6800 or 6900 series is selected according to the required bearing envelope and assembly conditions. Material, closure type and other specified bearing requirements are confirmed before sampling or order approval.
Where verification is required, bearing samples can be checked with the mating roller, shaft or housing before repeat orders. Once the specification is confirmed, the approved bearing configuration provides the reference for subsequent supply and assembly matching.
HUNE deep groove ball bearings are used as rotating components in roller wheels, sliding hardware and other guided motion assemblies. Different bearing series can be matched to the available installation space, roller structure and operating requirements of the finished component.
Deep groove ball bearings can be integrated into sliding door rollers, window rollers, shower door hardware and related track systems. The bearing works together with the roller wheel, shaft and housing to support guided movement within the assembly.
6200 and 6300 series deep groove ball bearings can be used in centrifugal pumps, water pumps, industrial pumps, air compressors, small compressors, gearboxes and mechanical drive systems. Bearing selection should consider shaft size, rotational speed, radial and axial loading, lubrication conditions and the available housing space.
Deep groove ball bearings are also used in lawn equipment, brush cutters, agricultural conveyors, small tractors and harvesting machinery. Different bearing sizes and closure configurations can be selected according to dust exposure, moisture, rotational requirements and the installation conditions of the equipment.
Providing the correct bearing and assembly information helps HUNE confirm the suitable series and configuration more efficiently. A bearing model number is useful where available, but dimensions, samples and roller assembly details can also be used for matching.
Provide the bearing model number where known, or specify the bore diameter, outside diameter and width. An existing bearing sample or technical drawing can also be used as a reference for matching.
Confirm the required bearing material and closure configuration, such as open, ZZ metal-shielded or 2RS rubber-sealed. Any specified clearance, lubrication or other technical requirements should also be included where applicable.
Provide the required order quantity and explain whether the bearing will be purchased individually or assembled with a roller wheel, shaft, housing or other HUNE hardware component. This helps us review compatibility together with the surrounding structure.
HUNE supplies 6000, 6200, 6300, 6800 and 6900 series deep groove ball bearings. The suitable series depends on the required bore, outside diameter, width and available installation space in the surrounding roller or mechanical assembly.
Start with the required bearing dimensions and installation space. Standard 6000 and 6200 series suit many general roller applications, while 6300 series provides a larger bearing section and 6800 or 6900 series can be considered where a thinner profile is required.
Yes. HUNE can supply open, metal-shielded ZZ and rubber-sealed 2RS configurations depending on the bearing series and project requirements. Closure selection should consider contamination, moisture, speed and the surrounding assembly.
Available options include high-carbon steel, bearing steel and stainless steel configurations. Final material selection should be confirmed according to the operating environment, assembly requirements and specified technical conditions.
Yes. If the bearing model is unknown, you can provide an existing sample, drawing or the bore diameter, outside diameter and width. Information about the shaft, housing or roller assembly can also help confirm compatibility.
HUNE supplies components and assemblies for sliding, guiding and mechanical motion systems, from bearings and roller wheels to stamped hardware and complete sliding door roller assemblies.
HUNE's product range connects individual bearing, roller and hardware components with more integrated sliding solutions. Buyers can source specific parts or explore related components required within the same mechanical assembly.
Deep groove ball bearings form a core rotating element in many roller wheels, guided mechanisms and sliding hardware assemblies.
Rubber, plastic and bearing-integrated roller products extend the core bearing function into components designed for sliding, guiding and rolling contact.
Custom stamped components, mounting hardware and door or window roller parts connect individual motion components with the surrounding mechanical structure.
For applications requiring a more integrated solution, HUNE's product range also includes heavy-duty sliding door roller assemblies that combine roller and hardware elements into a complete functional unit.
HUNE supports projects ranging from individual bearings, roller wheels and stamped parts to more integrated roller hardware assemblies. Drawings, samples and assembly requirements are reviewed together so that component specifications can be aligned with the intended application.
Customer drawings, physical samples and existing assemblies can be reviewed to understand dimensions, component relationships, material requirements and installation details before production planning.
Bearings, roller wheels, shafts, stamped parts and related hardware can be considered together where multiple components must fit or operate within the same mechanical assembly.
Approved drawings, confirmed samples and agreed inspection requirements provide the reference for repeat production and checking of relevant dimensions, structure and assembly features.
Specific materials, tolerances, finishes, inspection methods and production processes should be confirmed from the applicable drawing or technical requirements before production.
Send HUNE your drawing, physical sample or application requirements. We can review the component structure, bearing or roller configuration, mounting details and production requirements before preparing the next step for your project.
A technical drawing is ideal, but samples, dimensions, photos and assembly information can also help us understand your requirement.
