Wardrobe sliding door roller with an integrated buffer damper.
Wheel structure: Two PA6 nylon guide wheels, a 624ZZ bearing option and a plastic mounting bracket combined with an end-of-travel damper. The final wheel, bearing, bracket and damper specification follows the approved drawing.
This wardrobe sliding door roller with buffer damper combines panel guidance and controlled closing in one compact assembly. The twin nylon wheels follow the cabinet or wardrobe track, while the damper engages near the end of travel to reduce the final impact.
The supplied specification lists nylon or POM outer material, a 624ZZ bearing, a high-carbon steel or customized bearing option, a plastic housing and a tolerance of +/-0.1 mm. The page does not state a numerical damping force or travel distance, so those values must be checked against the door weight, track and end-stop position.
The pre-drilled bracket connects the assembly to the door or furniture frame. Wheel diameter, wheel spacing, bracket dimensions and damper interface should be selected together so the guide wheels remain aligned while the damping stage operates.
Product Applications
The assembly is intended for sliding wardrobe, cabinet and furniture panels that use a compatible guide track and require a damped closing point:
-
Wardrobe sliding doors: twin nylon wheels follow the track while the integrated damper cushions the final closing movement.
-
Walk-in closet systems: the compact assembly fits built-in bedroom furniture with a matching mounting surface.
-
Cabinet sliding doors: the roller provides guided movement for furniture panels where a buffer function is required.
-
Bedroom storage units: the double-wheel design can be used in wardrobes and storage cabinets with a compatible rail.
-
Wall-mounted sliding storage: the compact bracket supports panels where installation clearance is limited.
-
Office and display cabinets: the roller guides light-duty sliding cabinet doors in commercial furniture systems.
-
Replacement wardrobe hardware: an original roller, drawing or track section can be used to match wheel spacing, bracket and damper position.
-
OEM furniture programmes:
